Setting up a Schaudt / Lippert LRM 1218 MPPT Controller for use with a Roamer LiFePO4 lithium battery

Edited

Settings

To use the LRM 1218 MPPT controller with a Roamer battery, we recommend using the Lead Acid setting on the unit, to charge to 14.4V, the drop down to 13.4V for a float charge.


This is achieved by setting the two switches on the top of the unit the below settings:

Set S2 to "B".
Set S1" to "2".

Was this article helpful?

Sorry about that! Care to tell us more?

Thanks for the feedback!

There was an issue submitting your feedback
Please check your connection and try again.