Setting up an NDS SunControl2 (SCE320/SCE360) for use with a Roamer LiFePO4 lithium battery

This guide covers SCE320 & SCE360 models only, if you have a different model, please see our other guides.

The settings are pre-programmed into the SunControl series MPPT controllers. Profiles can be selected with the DIP switches circled in orange on the image below.

This one is really simple for a Roamer battery, set all 3 DIP switches to the down (on) position.

This charges to 14.2V, which is ideal, with no absorption or float phase.